MAFT Inside Car with both extensions

[Shane916]

Want to locate the maft inside the car and I purchased both extension harness'. The steering boot seems to far to run the extensions all the way to maft in the glove box or center console. The stock holes through the firewall are way to small to try to get the clips through. I have the large circle cutting bits that can punch through the firewall but there seems to be no accessible place to cut through without hitting wires. Any help would be appreciated. Thanks.

[98spydert]

Cut the plugs off the harnesses then re-solder them. This is the reason most of us made our own harnesses in the first place :)

[Shane916]

Cut the plugs off the harnesses then re-solder them. This is the reason most of us made our own harnesses in the first place :)

Lol I thought about that and I was hoping it wouldn't come down to that :) but I think you're right :P

[thomas91169]

yeah cut them and resolder. good thing is the wires are color coded. run one wire at a time from the harness on the maf to whereever on the inside. shouldnt take more than 20 minutes.